The best grease separators anywhere!

BS EN 1825 Tested Grease Separators

Lamina Filtertraps are highly efficient grease separators, tested to BS EN 1825, particularly suitable for sensitive locations i.e. when a sewage treatment plant or septic tank is used. There are two different ranges to choose from depending on the installation position required.

LAMINA FILTERTRAPS

The very high quality of grease and oil separation from these units (better than 25 parts oil per million parts water) has ensured their recurring popularity with Country Hotels and Roadside Restaurants. These establishments tend to have their own sewage treatment systems which must be prevented from greasing up otherwise they will issue raw un-treated sewage.

Apart from ensuring that the separation levels are un-surpassed, considerable thought has been given to the maintenance aspects of the Lamina Filtertrap. With all but the very smallest size, a mechanical lifting hoist is supplied. This allows the large capacity grease collection trays to be lifted and suspended above ground level where the valve on the side of the tray can be opened to allow the oil/grease to drain into a suitable waste container.

If a Garbage Grinder is to be installed in the kitchen, we recommend that the waste from it be run to enter the drains down stream of the Filtertrap. Alternatively, one size larger Filtertrap may be specified.

Click on the PART No. below to access a dimensioned drawing.

MODEL	PART No	MEALS/DAY	LENGTH	WIDTH	INLET DEPTH	GREASE CAP.
NS0.8LF	9115	80	700	700	200	40
NS1.25LF	9001	125	700	700	200	40
NS3LF	9000	300	1200	1200	650	80
NS4.5LF	9020	450	1200	1200	650	80

Please CONTACT US for more information or to place an order.

TANKER EMPTIED FILTERTRAPS
The Tanker Emptied Filtertraps are the largest in our range. These units are suitable for large Hotels, Food Processing Plants and other establishments which would prefer to have monthly emptying by suction tanker. The oil/grease and sediment storage capacity is increased considerably in this range. A Sediment separator is included for installation upstream of the main Filtertrap. If a Garbage Grinder (Macerator) is to be used, increase the size of Filtertrap by one model or direct the waste from the Grinder down stream of the Filtertrap.

Click on the part No. below to access a dimensioned drawing.

MODEL	PART No	MEALS/DAY	LENGTH	WIDTH	INLET DEPTH
NS10TE	9107	1,000	1500+800	1500	550
NS15TE	9108	1,500	1500+800	1500	550
NS20TE	9109	2,000	1500+1000	1500	550
NS25TE	9110	2500	1500+1000	1500	550

Please CONTACT US for more information or to place an order.